fracture toughness
基本解释
- [力] 断裂韧性
英汉例句
- Fracture toughness requirements.
断裂韧性要求。 - Fracture toughness against pressurised thermal shock, do you know what a pressurised thermal shock is?
对抗高压热冲击的断裂韧性，你们知道什么是高压热？ - MIM fabrication is ideal where near-full density, high impact toughness, fracture toughness, and fatigue and corrosion resistance are required.
MIM制造是理想，要求接近全密度、高冲击韧性、高断裂韧性、耐疲劳和耐腐蚀性。
双语例句
词组短语
- fracture and toughness 断裂和韧性
- dynamic fracture initiation toughness 动态起裂韧性
- fracture e toughness 断裂韧性
- Fracture mechanics toughness tests 断裂机械韧性试验
- ductile fracture initiation toughness 延性起裂韧性
短语
专业释义
- 断裂韧性
With the increasing of Si size, the fracture toughness of the Al-Si alloy declines gradually.
随着硅相直径的增加，合金的断裂韧性逐渐降低。 - 断裂韧度
The relation between the surface-crack fracture toughness and the fracture surface apperance were analyzed and disxussed.
分析讨论了表面裂纹断裂韧度与断口形貌特征的关系。机械工程
- 断裂韧性
Flexural strength and fracture toughness of SiO2-AlN composites with 30 vol% AlN particles sintered at 1400℃ reached 200 MPa and 2.96 MPa*m1/2 respectively.
1400℃下热压烧结的30 vol%AlN-SiO2复合材料的抗弯强度和断裂韧性分别达200 MPa和2.96 MPam1/2。 - 断裂韧度
The influence of wedge on transmitting of stresss wave and determination of dynamic fracture toughness was analyzed in this article. Three diffierent sizes of wedge were designed, those were:3, 15.5 and 40mm.
本文分析了楔形头尺寸对应力波传播及动态断裂韧度测试的影响，共设计了以下三种尺寸楔形头：3mm、15.5mm和40mm。物理学
- 断裂韧度
- 破断韧性
- 破碎韧性
- 破裂韧性
- 断裂切度
- 破裂韧性
- 断裂韧度